Skip to main content
Business Licence Information Service
Mobile Version
Print
Business Licence Information Services
New Search
Epoxy Injection, Site Grouting & Steel Sheet Piling, Contractor
If your business involves the following situations, you may need to apply for specific licence(s). Please put a √ in the appropriate box(es) for further information:
You will use any boilers (including thermal oil heater and pressure cookers), pressure vessels (such as steam receivers, air receivers, pressure vessels for human occupancy, vulcanizers (AR) and pressurized bulk tanks, other than pressurised fuel containers) or steam containers.
You will use powered mechanical equipment (other than percussive piling) for construction between 7pm and 7am, or anytime on a holiday.
You will carry out percussive piling.
You will use air compressor capable of supplying compressed air at 500kPa pressure or above in construction work.
You will dispose of or reprocess or re-cycle any chemical waste.
You will, as a chemical waste producer, store chemical waste in any containers with a capacity exceeding 450 litres.
You will employ competent person to operate your boiler or steam receiver.
You will establish, operate private portable transceivers.
Your business entity will operate as a company with limited liability in Hong Kong.
Your company is incorporated outside Hong Kong and planning to establish a place of business in Hong Kong.
You will construct or operate a designated project listed in Part I of Schedule 2 or to decommission a designated project listed in Part II of Schedule 2 of Environmental Impact Assessment Ordinance (Cap. 499).
You will sell or lease a Non-road Mobile Machinery (NRMM), including regulated machines and non-road vehicles, for use in Hong Kong. / You will use or cause to be used a NRMM in a specified activity/location (including airport's restricted area, port facilities, construction sites and designated waste disposal facilities).